Steely Seamstress

Sewing for life


7 Comments

#1year1outfit – The Hacking Jacket Part 5 (aka The Final Post)

There are only so many progress posts that any one garment can justifiably warrant and this is my final progress report on the “Hacking Jacket” for my #1year1outfit.

HempJacket4

The original jacket pattern (New Look 6035) was an unlined garment, but since I’ve been following Steffani Lincecum’s excellent Craftsy course on tailoring I decided to add a lining made from shibori-dyed silk (see my previous post). I followed Steffani’s instructions much more for these final stages in the construction as I was very much moving away from the original pattern at this point.

To cut my lining pieces, I basically discarded the Back facing from the original pattern and cut the Side back and Side Front pieces as they are in the pattern. I used the Front facing, as it is, cut in the hemp, rather than the lining fabric. I realise that quite often in a lined jacket, that the front facing might be smaller than in an unlined jacket, but I didn’t feel like drafting an extra lining piece and stuck with the front facing as it is. For the Back piece I added an extra 3 cm at the centre back. The reason for this is to add extra ease in the lining. It sounds counter-intuitive to have a lining that is actually larger than the jacket, but Steffani explains that this is really essential. The outer jacket has a different “hand” with a slight stretch whereas the lining, which is a woven silk, has no give at all. To make sure that there is no distortion and the jacket hangs well with no pulling, it is necessary to make the lining bigger.

After cutting the lining out, this was sewn together. I used Steffani’s hand-stitching technique at the facing. This keeps the lining from shifting around too much at the facing and it looks beautiful. I do like these extra technique’s that Steffani puts in the course. They make the garment look extra special.

HempJacketInside

Once, I’d attached the lining to the jacket, the jacket was then turned the right way round. This is definitely the moment when you start the see what the finished jacket will look like.  To ensure that there is the correct “turn of the cloth”, Steffani recommends tacking the lapels and collar to hold them in place before you press the jacket. When pressed, the seam line should not be visible from the front of the jacket. This means that on the collar and lapels the seam line is underneath, but as you travel down the edge of the lapel and get to the button area, the seam line should then tuck around to the other side so that it isn’t visible from the front of the jacket. I had never considered this when making a jacket and it makes it look so professional.

HempJackeLining1

There was one step where I really went my own way with the construction. For the back of the button-hole, I felt that my hemp fabric was too prone to fraying to be able to use the technique in the Craftsy video. The video suggests that a button-hole size hole is made and the fabric just rolled under and slip-stitched in place. I decided to sew an extra piece of fabric, as you would for the button-hole in the front of the jacket and then fold this to the inside through the hole and secure it in place with hand-stitching. This made me feel happier about the robustness of my button-hole. I found that this technique is more or less described in this tutorial on the Colette website.

HempJacketButtonHole

Just a few more jobs to complete my jacket, finishing the jacket hem, sewing in the sleeve linings and adding the button and hey presto, finally my jacket is complete!

HempJacket3

I’m a little unsure about the placing of the button on the garment. I checked the pattern and I have placed it correctly. Looking at the front of the pattern envelope I can see that the button is placed at approximately waist height.

NewLookPattern

I think I would have preferred the button a little higher, or maybe even two buttons on the jacket? It would have made the finished jacket more cosy and less open. I suppose though that the original jacket is supposed to be a more summery garment, so I can’t really blame the pattern for this.

HempJacket5

Overall, I’m proud that I sewed this. It has taken me a long time to complete and I’ve learned many new techniques and taken my sewing to a whole new level with this jacket.

HempJacket1

HempJacket2


6 Comments

#1year1outfit – The Bristol Cloth and the Beginnings of a Hacking Jacket

I’ve been noticing that the #1year1outfit challenge has been generating a lot of posts recently and I feel that I have been neglecting my contributions to the challenge. I’m hoping to put this right over the next couple of months with dedicated sewing!

But first I thought I share some more research. Bristol is European Green Capital this year and a projects that particularly sparked my interest is the Bristol Cloth Project. The Bristol Cloth Competition is a contest to design a local textile. The deadline for entries was last month and the shortlisted entries are on display at the moment.

Bristol Cloth

The designs are all beautiful and they take their inspiration from local architecture, cycling tweeds and basket-weaving.

DSCF3470

DSCF3464

DSCF3466

The cloth is going to be produced using local wool from Fernhill Farm, dyed with natural vegetable dyes from Botanical Inks, (you may remember that I attended one of their workshops back in April) and woven at Dash and Miller.Now you can’t get more local than that – all the elements of this fabric will come from within 20 miles of my house.

I suspect that the finished cloth won’t be available until next year, which is shame as I wanted to include a make with this very local fabric in this year’s challenge. But there’s always next year.

I do have an update on a garment that is in progress too. In the quest to find new and interesting fabrics for the challenge, I started to explore historical re-enactment websites and I came across this 100% hemp fabric which is grown and made in the South-West of England. The fabric is used, in the re-enactment world, for Viking dresses and cloaks. The only thing I don’t know about this fabric was how it was dyed. The website didn’t supply the information about that.

I wasn’t quite sure what to expect when I ordered it. It’s always difficult to know from a website. When it arrived I found that it was quite crisp, with a coarse weave and it smelled of old string, not surprisingly, as it is hemp! I’m pleased with the colour – it is a beautiful, subtle colour, more a pale green, than khaki.

I had thought, before it arrived, to make some trousers with the fabric. But, on reflection, the fabric will lend itself much better to being made into a jacket. I think the structured look of a jacket will help make it look less “dark ages” and more in tune with modern attire.

IMG_0600

I washed it in the washing machine at the weekend and, although I may be imagining this, I think it has softened the fabric somewhat. (Hemp is supposed to soften after repeated washings). The “string” smell has died down too!

I had a look for jacket patterns in my stash, and eventually settled on the “Hacking Jacket” pattern, for an unlined jacket, in the first Sewing Bee book. I have already made one of the projects from the Sewing Bee book before. It was one of the simpler projects – an apron and it turned out well, but I did spot a glaring error in the pattern. It was nothing major, just a mislabelled pattern piece. The Hacking Jacket, however, is reproduced from a New Look pattern, so I hoped that this didn’t have any problems.

IMG_0602

Unfortunately, this pattern is far, far worse. Firstly, it seems to have been reproduced without any of the pattern pieces being identified. Fortunately, the scale drawing in the book is a big help on this front. However I was disappointed to find that the button / buttonhole markings are missing and the positioning dots were unlabelled, or sometimes missing. It all added up to a situation where I didn’t feel confident about this make.

IMG_0603

I was trying to make my fitting adjustments, which I usually do at the same time as tracing my pattern However, not knowing where the waist was supposed to be, or how much the left and right fronts overlapped, making fitting adjustments would be a huge amount of guesswork. I got cold feet today and just went and bought the New Look pattern (New Look 6035) and discovered a wealth of missing information from the pattern and the instructions. I’m really glad that I decided to take the mystery and guesswork out of this project, but the extra expense really shouldn’t have been necessary and it was luck that the pattern is still on sale.

It just makes me feel frustrated for any beginners who have struggled with this book. Or perhaps not that many people have made up the projects in this book. They could have published some errata and improved the PDF patterns on the website after the book was published.

Last night I was just tracing out my pattern and customising it for my size, when I started to feel a little cold. As the nearest thing to hand I grabbed my 2 metres of hemp and tucked myself up on the sofa with it. I couldn’t believe how warm it is. I’d always imagined how cold life must have been to our forebears in this chilly part of the world, but hadn’t factored in that they would probably have worn heavy fabrics like this. Incidentally, I had noticed that it dried rather quickly as well (in about 2 hours on the line outside, which is quick, considering it is September). A cotton towel drying alongside, took virtually the whole day. Perhaps my imagined vikings didn’t spend their time sitting around shivering in damp, “stringy”-smelling cloaks after all.

I should be able to get the pattern tracing finished properly tonight, now I have all the information I need. I will just have to make good use of the top, skirt and trouser pattern also included with New Look 6035 so that I don’t feel I’ve wasted my money.